6 x NEW Vanson Conversion Bushings

Available in either Chrome, Nickel or Gold colour (please select from drop-down menu above)

Please note: these will not fit Kluson Imperial spec 1/4 inch (6.30mm) posts, only Metric tuners with 6mm posts, such as Wilkinson WJ55, WJ45 etc

Our bushings are made from Brass, which is then Chromed, (unlike some cheaper plastic alternatives on the market). Suitable for any guitar with approx 10mm diameter peghead holes, to fit a tuner with a 6mm shaft. (ie. a modern neck with vintage style tuners). All of our bushings are made in the same factories that supply major brands, and are therefore of a high quality and suitable for any level of instrument.

Tip: As wood shrinks over time it's always best to have a nice tight fit with your tuners bushings. A lot of luthiers will use a protected G-clamp to press these in so that there's equal pressure on both sides of the headstock as they're being inserted, rather than running the risk of damaging your headstock by tapping them in from the front. Please make sure your peghead hole is large enough, and run a 10mm drill bit inside to enlarge if need be, as the actual diameter (including the teeth) is 10.8mm. Thought I'd mention, as you don't want them so loose that you can push them in with your little finger but also you don't want to damage your guitar either by using too much force. If you're unsure about anything then do ask a guitar tech.

All parts are shipped OEM, as pictured, in protective packaging

Bushings & Ferrules

Filter Products

6 x NEW High Quality Conversion Bushings, guitar tuners 10.8mm to 6.2mm reducer

6 NEW High Quality VANSON Vintage Guitar String Ferrules for Telecaster Tele etc

6 x NEW High Quality Smooth Guitar Ferrules / mounting / string through back